Your printing equipment is the way you earn your income. It is a critical piece of equipment and must be handled properly. This means, when you move it, it be installed in the right way. It may be that the first time you need to move it, it needs to come from the store you bought it from. After that, whenever you have to reposition it, the right attention should be paid to install it properly again. That means you should consider a company that does this every day, such as a printing press installation services firm.
You can locate one of these companies by talking with the salesmen or woman who sold you the machine. They will have a list of professionals that have been used in your area. They may offer this service themselves and throw it into the price of the press. That would make a better deal even more worthwhile. Think about it as they are more familiar with that press than others.
The thing that makes an offset press different than a platten fed one is the fountain system. This system feeds a water solution to the plate cylinder. In order for this gravity fed system to operate properly, it must be absolutely level. This is not just lowering the legs, it is positioning the machine where it is not interfered with.
In order to get good coverage of ink, this thick compound must stay in the reservoir. This also means the machine must be leveled and the experts who do this installation knows this. In order to cover the entire plate cylinder, the ink must flow properly and only a stable, level machine can accomplish this, especially if you are working with our process work.
After you call these installation experts, they will arrive and inspect the site. The press, itself, will also be examined. They will help you see what space around the piece of equipment can impact the operation of the press. They will get prepared for the move and ensure the plan is set and approved by you.
They will either be picking the equipment up at the dealer or moving it from one of your locations to another. If they will be moving it in their vehicle, it will need to be secured so it does not move around. All presses are fairly heavy but they should still not be treated as an afterthought. The strapping will have to be placed and tightened to ensure nothing is bent or restricted enough to become malformed.
If they will be moving it from one area of your shop to a newly remodeled one, the proper use of dollies and strapping will be employed as well. They will have as many people on hand to see that it is handled carefully. They should also know that setting your machine on anything that is unstable will not be a sustainable model for success for you.
The materials and supplies they need to accomplish their tasks will come along with them. They will get it positioned and it will be ready when you are. That means to ink it up and get your make ready inserted. Your plate can be burnt and installed and the first run can happen minutes later.
You can locate one of these companies by talking with the salesmen or woman who sold you the machine. They will have a list of professionals that have been used in your area. They may offer this service themselves and throw it into the price of the press. That would make a better deal even more worthwhile. Think about it as they are more familiar with that press than others.
The thing that makes an offset press different than a platten fed one is the fountain system. This system feeds a water solution to the plate cylinder. In order for this gravity fed system to operate properly, it must be absolutely level. This is not just lowering the legs, it is positioning the machine where it is not interfered with.
In order to get good coverage of ink, this thick compound must stay in the reservoir. This also means the machine must be leveled and the experts who do this installation knows this. In order to cover the entire plate cylinder, the ink must flow properly and only a stable, level machine can accomplish this, especially if you are working with our process work.
After you call these installation experts, they will arrive and inspect the site. The press, itself, will also be examined. They will help you see what space around the piece of equipment can impact the operation of the press. They will get prepared for the move and ensure the plan is set and approved by you.
They will either be picking the equipment up at the dealer or moving it from one of your locations to another. If they will be moving it in their vehicle, it will need to be secured so it does not move around. All presses are fairly heavy but they should still not be treated as an afterthought. The strapping will have to be placed and tightened to ensure nothing is bent or restricted enough to become malformed.
If they will be moving it from one area of your shop to a newly remodeled one, the proper use of dollies and strapping will be employed as well. They will have as many people on hand to see that it is handled carefully. They should also know that setting your machine on anything that is unstable will not be a sustainable model for success for you.
The materials and supplies they need to accomplish their tasks will come along with them. They will get it positioned and it will be ready when you are. That means to ink it up and get your make ready inserted. Your plate can be burnt and installed and the first run can happen minutes later.
About the Author:
You can find an overview of the benefits you get when you use professional printing press installation services at http://www.jbirket.net/services right now.
No comments:
Post a Comment