After oxygen, water comes second as the most critical life necessity. Human beings are only able to survive for only a few minutes with no oxygen before they pass on. One the flip side, individuals have the capacity to last close to a week with no water before they succumb to death. The body can put up with food deprivation for close to one month before on dies depending on many factors. When in search of Water well drilling Fort Davis Texas should be given priority.
In order to access this important life necessity, people have been using a wide range of ways. One this ways is through making water wells. Water well drilling is an activity that has been ongoing for over ten thousand years now. However, until about 100 years ago, well making was ineffective since it was done by hands. People could use their hands and simple tools to dig holes in the ground to access groundwater.
In some communities, it was a culture for all individuals to participate in the well digging activity. Every person was allocated space and time to do the digging. These wells have some limitations although they are dug by hands in order to supply people with groundwater. One limitation is that they are so shallow. They extend a few feet only into the ground.
These wells were also some feet wide, thus they were risky. Over the years, a well drilling method, percussion, was invented and first used by the Chinese. It is estimated that the Chinese were using this method over four thousand years prior to its spread. They could make deep wells, extending thousands of feet into the ground.
Percussion driven wells started to be made in the US only in the early 1800s. This method was done using manpower, but later horses started to be used. In the mid-1800s, steam power was adopted in drilling. The coming of Industrial revolution took drilling to another level through the introduction of internal combustion engine power. Today, many companies use rotary drill bits in place of percussion drilling.
This method is increasingly efficient and quieter when carrying out the task. Upon drilling the well, there is a likelihood of contaminants getting into it and polluting the water. In effort to eliminate or minimize this likelihood, liners or casings are fitted on the walls of the wells. Furthermore, casings prevent collapsing of well walls.
The manual methods used for drawing groundwater from wells have been stopped due to invention of water pumps. The pumps are normally in a position to pump water from where it is situated, even several hundred feet from the ground. Nevertheless, because pumps are not able to draw groundwater from sources which are too far, one should reduce the distance between the pump and the groundwater.
To this effect, surface pumps are only ideal in shallow wells. On the contrary, should the well be extremely deep, the pump must be lowered inside the well. This ensures that it is near the groundwater. This setup functions efficiently and has the capacity to supply enough groundwater for municipal, residential, and agricultural usage.
In order to access this important life necessity, people have been using a wide range of ways. One this ways is through making water wells. Water well drilling is an activity that has been ongoing for over ten thousand years now. However, until about 100 years ago, well making was ineffective since it was done by hands. People could use their hands and simple tools to dig holes in the ground to access groundwater.
In some communities, it was a culture for all individuals to participate in the well digging activity. Every person was allocated space and time to do the digging. These wells have some limitations although they are dug by hands in order to supply people with groundwater. One limitation is that they are so shallow. They extend a few feet only into the ground.
These wells were also some feet wide, thus they were risky. Over the years, a well drilling method, percussion, was invented and first used by the Chinese. It is estimated that the Chinese were using this method over four thousand years prior to its spread. They could make deep wells, extending thousands of feet into the ground.
Percussion driven wells started to be made in the US only in the early 1800s. This method was done using manpower, but later horses started to be used. In the mid-1800s, steam power was adopted in drilling. The coming of Industrial revolution took drilling to another level through the introduction of internal combustion engine power. Today, many companies use rotary drill bits in place of percussion drilling.
This method is increasingly efficient and quieter when carrying out the task. Upon drilling the well, there is a likelihood of contaminants getting into it and polluting the water. In effort to eliminate or minimize this likelihood, liners or casings are fitted on the walls of the wells. Furthermore, casings prevent collapsing of well walls.
The manual methods used for drawing groundwater from wells have been stopped due to invention of water pumps. The pumps are normally in a position to pump water from where it is situated, even several hundred feet from the ground. Nevertheless, because pumps are not able to draw groundwater from sources which are too far, one should reduce the distance between the pump and the groundwater.
To this effect, surface pumps are only ideal in shallow wells. On the contrary, should the well be extremely deep, the pump must be lowered inside the well. This ensures that it is near the groundwater. This setup functions efficiently and has the capacity to supply enough groundwater for municipal, residential, and agricultural usage.
About the Author:
You can find an overview of the benefits and advantages you get when you use professional water well drilling Fort Davis Texas services at http://www.arrowheadwellservice.com today.
Drilling wells is not an easy task, especially residential well drilling.
ReplyDeleteThat is why a good idea is you need to connected examine prior to producing. You can actually distribute greater distribute this way. submersible vs external well pump
ReplyDelete