Most people take for granted the markings in the parking since many imagine it to be an easy process just like painting on other faces. On the contrary, marking parking spaces is an arduous task that takes a lot of time to plan in order to ensure safety of the people using them. A lot of planning is needed to make sure that the aesthetics of the establishment are enhanced and at the same time comply with federal and local laws governing the industry. When one needs Striping Houston offers the perfect location to visit.
Since the process of marking parking lots is complicated and involves a lot of steps than it is often thought, it is important to hire a professional. One must work with a company that has the right experience, equipment, technical expertise, and labor. The contractor must have a good understanding of the local and federal laws in order to ensure compliance.
The procedure of lot marking begins with preparing the area. To make sure that the paint sticks properly, it is vital to prepare the surface adequately. In the event the surface has dirt, it should be removed by a number of methods. One of the ways is using a high pressure washer which is able to eradicate most types of dirt.
With the prepared surface ready for application of paint, the team must then start planning how and where to apply the lines. One may choose to design the aisle so that it allows for one-way or two-way traffic. The flow of traffic in the area as well as the size of space may determine if the aisle is designed to be one-way or two-way.
The plan must entail consideration of the safety of both drivers and pedestrians. In order to avoid collision, space in the parking lot should be sufficient. These spaces ought to be adequately broad so that drivers are able to move in and out with convenience. The length and width of spaces that cars are parked in are normally determined by federal and local standards.
This job can be done using several types of paints. The type of paint that should be used is usually determined by the type of surface being painted. Sealed or new asphalt pavements always work well with paints that are water-based. On the other hand, paints that are rubber-based work best on pavements made using concrete. One should research to ensure that they use the correct paint because there are many other types of paints and surfaces.
As the parking lot is used, the paint is removed with time since it is exposed to wear and tear. The parking lot that has many vehicles tends to wear out faster than those that have little traffic. Generally, the lot needs to be repainted in every two years. As a rule in the industry, the lot should be repainted once visibility falls by 25 percent.
The paint usually dry very fast. It may only take thirty minutes for the paint to be completely dry. However, as a precaution, the lot should not be open to use by vehicles until an hour has elapsed. This is because some spots may not have dried completely after thirty minutes.
Since the process of marking parking lots is complicated and involves a lot of steps than it is often thought, it is important to hire a professional. One must work with a company that has the right experience, equipment, technical expertise, and labor. The contractor must have a good understanding of the local and federal laws in order to ensure compliance.
The procedure of lot marking begins with preparing the area. To make sure that the paint sticks properly, it is vital to prepare the surface adequately. In the event the surface has dirt, it should be removed by a number of methods. One of the ways is using a high pressure washer which is able to eradicate most types of dirt.
With the prepared surface ready for application of paint, the team must then start planning how and where to apply the lines. One may choose to design the aisle so that it allows for one-way or two-way traffic. The flow of traffic in the area as well as the size of space may determine if the aisle is designed to be one-way or two-way.
The plan must entail consideration of the safety of both drivers and pedestrians. In order to avoid collision, space in the parking lot should be sufficient. These spaces ought to be adequately broad so that drivers are able to move in and out with convenience. The length and width of spaces that cars are parked in are normally determined by federal and local standards.
This job can be done using several types of paints. The type of paint that should be used is usually determined by the type of surface being painted. Sealed or new asphalt pavements always work well with paints that are water-based. On the other hand, paints that are rubber-based work best on pavements made using concrete. One should research to ensure that they use the correct paint because there are many other types of paints and surfaces.
As the parking lot is used, the paint is removed with time since it is exposed to wear and tear. The parking lot that has many vehicles tends to wear out faster than those that have little traffic. Generally, the lot needs to be repainted in every two years. As a rule in the industry, the lot should be repainted once visibility falls by 25 percent.
The paint usually dry very fast. It may only take thirty minutes for the paint to be completely dry. However, as a precaution, the lot should not be open to use by vehicles until an hour has elapsed. This is because some spots may not have dried completely after thirty minutes.
About the Author:
You can find a detailed list of the advantages and benefits of using professional parking lot striping Houston services at http://www.semperstriping.com right now.
No comments:
Post a Comment