At the present, powder coating is among the methods used to apply finishes on surfaces and objects. This method uses dry powder unlike traditional painting techniques which uses liquid paint to attain a finish. Usually, the process is complicated compared to painting, hence special equipment is needed. However, similar procedures are followed. When in search of professional powder coating Denver should be given priority.
The first step in this process is to prepare the surface by removing cleaning it and smoothening it if necessary. The second process involves the actual application of the powder. Lastly, the powder applied is cured in place to form the final finish. The curing process is done inside a special equipment referred to as an oven. Curing requires heat for it to occur. The heat must be applied and maintained consistent in the oven at all times during curing.
The resultant finish is normally consistent, durable and very smooth. Apart from this, using this method it is possible for one to achieve many varying special effects. Possible special effects that can be achieved include fine, wrinkle, river rein, multi-component, translucent and domant. Every effect has a distinctive appearance and a certain procedure of doing it.
Normally, when epoxy, polyester, or urethane chemistry is applied, one achieves the wrinkle effect. It is difficult to attain this effect and novices normally undergo difficult moment to work with it. However, when some practice is performed on sample surfaces, individuals finally become used to it hence work to perfection. Usually, the substrate and the curing process are applied in the two core stages that come with problems to novices.
One must ensure that the surface is properly cleaned and dried before the process can start. Consistency is very important when cleaning to ensure that all corners of the surface is thoroughly cleaned and dried. This is meant to prevent the formation of spots in the final finish. Curing must also be done under uniform temperatures in the oven. If some parts of the oven are hotter than others, the finish will be ruined.
Translucent finishes are available in a wide variety of colors. This type of finish applies powder onto the surface but manages to let light pass through it. This beautiful spectacle is preferred and loved by most people. To achieve this, polyester or chemistries of urethane is used. In comparison to urethane finishes, polyester finishes tend to be less smooth in the final exterior and have limited durability. Although, stickier, urethanes offer better general appearance and flow.
There also exists a major limitation that comes with translucent finish. The limitation is that it is very easier to attain uneven pigmentation as a final finish. Unevenness occurs in the pigmentation at most when objects are irregularly shaped. The thickness that varies to a maximum of a millimeter is visible. One can possibly use a base coat just like undercoats are applied in conventional liquid painting.
Base coats help in achieving uniformity, especially if the coloring of the surface is not uniform. Translucent finishes are hugely preferred because they tend to offer impressive brightness that surpass most other finishes. This brightness works well on stainless steel surfaces.
The first step in this process is to prepare the surface by removing cleaning it and smoothening it if necessary. The second process involves the actual application of the powder. Lastly, the powder applied is cured in place to form the final finish. The curing process is done inside a special equipment referred to as an oven. Curing requires heat for it to occur. The heat must be applied and maintained consistent in the oven at all times during curing.
The resultant finish is normally consistent, durable and very smooth. Apart from this, using this method it is possible for one to achieve many varying special effects. Possible special effects that can be achieved include fine, wrinkle, river rein, multi-component, translucent and domant. Every effect has a distinctive appearance and a certain procedure of doing it.
Normally, when epoxy, polyester, or urethane chemistry is applied, one achieves the wrinkle effect. It is difficult to attain this effect and novices normally undergo difficult moment to work with it. However, when some practice is performed on sample surfaces, individuals finally become used to it hence work to perfection. Usually, the substrate and the curing process are applied in the two core stages that come with problems to novices.
One must ensure that the surface is properly cleaned and dried before the process can start. Consistency is very important when cleaning to ensure that all corners of the surface is thoroughly cleaned and dried. This is meant to prevent the formation of spots in the final finish. Curing must also be done under uniform temperatures in the oven. If some parts of the oven are hotter than others, the finish will be ruined.
Translucent finishes are available in a wide variety of colors. This type of finish applies powder onto the surface but manages to let light pass through it. This beautiful spectacle is preferred and loved by most people. To achieve this, polyester or chemistries of urethane is used. In comparison to urethane finishes, polyester finishes tend to be less smooth in the final exterior and have limited durability. Although, stickier, urethanes offer better general appearance and flow.
There also exists a major limitation that comes with translucent finish. The limitation is that it is very easier to attain uneven pigmentation as a final finish. Unevenness occurs in the pigmentation at most when objects are irregularly shaped. The thickness that varies to a maximum of a millimeter is visible. One can possibly use a base coat just like undercoats are applied in conventional liquid painting.
Base coats help in achieving uniformity, especially if the coloring of the surface is not uniform. Translucent finishes are hugely preferred because they tend to offer impressive brightness that surpass most other finishes. This brightness works well on stainless steel surfaces.
About the Author:
Get an overview of the factors to keep in mind when choosing a powder coating Denver company and more information about a reputable company at http://www.qlapi.com now.
No comments:
Post a Comment