Sunday, January 27, 2019

Purposes Of Manufactured Mobile Home Tie Down Anchors

By Stephanie Taylor


Tie downs are heavy-duty straps or anchors that are designed to stabilize mobile or manufactured homes from high winds. If the gadgets are not properly fixed, it reduces the capability of the structure to resist overturning and sliding. Manufactured homes are easily destroyed or flipped in case of windstorms as compared to site-built hence using manufactured mobile home tie down anchors make them stable on the ground.

And since mobile homes are elevated, they are susceptible to wind uplift forces if they are not well supported. Wind passing above the structure may exacerbate the impact. More so, manufactured homes are considerably lightweight as compared to site-built homes. And to avoid causing problems to homeowners, the structures ought to be checked regularly.

If you buy the mobile house and you do not know how to go about them, you might end up suffering the consequences. And that is the essence of professionalism. Usually, these homes are made from caravan materials, and their safety can only be guaranteed when fixed well and firmly to the ground. Frequent evaluations of the ties ensure your house stays away from danger.

When tie downs are fixed well, they adequately hold the manufactured home enabling it to support against strong winds. Temporary structures are usually affected by windstorms and hence the need for stability. Note that timely inspection cannot be exempted. Another thing is location. It affects the number of anchors utilized to hold the strong winds. Ensure the area where the house is laid down is appropriate for your residence.

The number of ties downs utilized to fix your house is also determined by the length and location of your structure. For instance, more tie downs are required in coastal places due to stormy weather and strong winds. To hold the structure tightly, two kinds of anchors are needed.

The diagonal anchor and the vertical one. Vertical anchors are applied over single-wide houses, and they aim to resist the home from being taken away by storms or winds. On the other side, diagonal ones play the same role, but they are fixed tightly to the ground. However, double-wide structures normally utilize the diagonal sorts due to the issue of weight. The numbers applied here could vary from 3 to 5 per every side especially in zones with gentle winds. But for very stormy areas or where tough winds hit, expect usage of 4 to 7 anchors.

With single-wide mobile houses, two to four vertical ties are needed according to the length of that structure. More can be utilized for higher insurance against the wind and storm ravages. If the house has site considerations or attachments, consulting your county engineer should be done on how to fix the structure. Some locations require an expert to evaluate the ties and provide certification that the structure is anchored well and also the location is safe.

When scrutinizing appropriate setup of your house, if necessary, thus leave it to professionals. For areas considered as high-risk, usually, additional ties will be required. Get to know the kind of soil to ascertain that appropriate anchors are applied. Locate where water, sewer, and gas lines or wires and cables are placed before anchoring. Ensure all anchoring supplies meet requirements and are not affected by corrosion.




About the Author:



No comments:

Post a Comment