Currently, there are three types of wells in existence. The type of water well that one wants to make will determine the kind of service company or contractor they will hire. The three types of wells are dug wells, driven wells, and drilled wells. Some wells are more common in certain places than others. Dug wells for instance are most commonly found in less-developed countries or in rural areas. When one needs Water Well Drilling Fort Stockton Offers the perfect location to visit.
Dug well still exist since some people are not able financially to hire the services of a drilling company. These regions are also less developed thus cannot access the latest drilling technology. Finally this is more suitable in areas with deep water-tables.
For several years back, dug wells were very common. However, as more individuals access technology, they are becoming less common every day. Dug wells are constructed using hand shovels. An individual digs a hole in the ground until underground water is accessed. As this digging occurs, buckets are employed to scoop water and empty it out of the hole. This procedure takes place till there is too much water to be emptied from the hole that more digging can be done.
These wells are difficult to dig past the water-table. There are chances the well may dry up during the reason thus they are not reliable. To avoid drying up one should dig the well during the dry season when the water table is low. The digging process has a number of challenges. In cases where the hole is dug too deep, cases of suffocation are common. Sometimes people get buried alive when the soil gets too loose and caves in.
Driven wells are another type of wells that are in common use today. Although they are not very common, they are still in use in many parts of the world. They are dug by driving a pipe of a small diameter into soft earth. Such soft soils include sand or gravel. Sand and other particles that get into the pipe are removed using a screen.
Since they may not be driven in hard soil, driven wells never go deep. Consequently, they are normally much shallow. This is among the greatest disadvantages of these wells. Surface contaminants are likely to affect shallow well. This makes water not good for domestic use or for drinking.
Finally, a drilling rig is used to dig out drilled wells. The drilling process is quite costly but the well drilled is more durable and has safe water for domestic use. The rigs used for the drilling process are normally attached on big trucks. There are a number of bits that can be attached to the drilling rig. Some of the drill bits being used currently include auger bits, rotary drill bits, and percussion bits.
For hard rock, rotary drill bits are designed to drill through such surfaces. Hard materials like diamond are used to make drill bits. Auger bits are designed for soft ground while percussion bits cut through rock by smashing. Drilled wells are usually very deep. The depth may extend more than 1000 feet. Pumps are used to pump water out of them for domestic use.
Dug well still exist since some people are not able financially to hire the services of a drilling company. These regions are also less developed thus cannot access the latest drilling technology. Finally this is more suitable in areas with deep water-tables.
For several years back, dug wells were very common. However, as more individuals access technology, they are becoming less common every day. Dug wells are constructed using hand shovels. An individual digs a hole in the ground until underground water is accessed. As this digging occurs, buckets are employed to scoop water and empty it out of the hole. This procedure takes place till there is too much water to be emptied from the hole that more digging can be done.
These wells are difficult to dig past the water-table. There are chances the well may dry up during the reason thus they are not reliable. To avoid drying up one should dig the well during the dry season when the water table is low. The digging process has a number of challenges. In cases where the hole is dug too deep, cases of suffocation are common. Sometimes people get buried alive when the soil gets too loose and caves in.
Driven wells are another type of wells that are in common use today. Although they are not very common, they are still in use in many parts of the world. They are dug by driving a pipe of a small diameter into soft earth. Such soft soils include sand or gravel. Sand and other particles that get into the pipe are removed using a screen.
Since they may not be driven in hard soil, driven wells never go deep. Consequently, they are normally much shallow. This is among the greatest disadvantages of these wells. Surface contaminants are likely to affect shallow well. This makes water not good for domestic use or for drinking.
Finally, a drilling rig is used to dig out drilled wells. The drilling process is quite costly but the well drilled is more durable and has safe water for domestic use. The rigs used for the drilling process are normally attached on big trucks. There are a number of bits that can be attached to the drilling rig. Some of the drill bits being used currently include auger bits, rotary drill bits, and percussion bits.
For hard rock, rotary drill bits are designed to drill through such surfaces. Hard materials like diamond are used to make drill bits. Auger bits are designed for soft ground while percussion bits cut through rock by smashing. Drilled wells are usually very deep. The depth may extend more than 1000 feet. Pumps are used to pump water out of them for domestic use.
About the Author:
When you are searching for information about water well drilling Fort Stockton residents can come to our web pages today. More details are available at http://www.arrowheadwellservice.com now.
No comments:
Post a Comment